GET A QUOTE
→The NS-X5 & Transfer Series fully automatic cartoner erects cartons by means of vacuum pick off from a magazine, by detection of product and places the carton into continuously moving flighted chains. The product can be placed either automatically or manually into the product bucket conveyor and is then loaded into the carton. The product buckets slide over to the carton opening at point of loading thereby allowing close control of the product.
The machine is fitted with a no carton no product reject unit which discards the product outside the guard line of the machine. After loading glue is applied to the bottom minor flaps, which are closed and sealed automatically. Powered side belts discharge the cartons from the machine.
Overhead product paddle transfer system The unit is designed to incorporate one or two product infeed conveyors, depending on the output speed required. A single lane infeed conveyor has the capacity to operate at up to 100 products per minute, and a double lane conveyor will operate at twice the capacity of a single lane system. The system is designed to automatically receive product from either one or two lanes, and places the product on the followdown ramp.
Variable up to 200 cartons/minute
Hot melt (jet gluing) cold glue or tuck.
Electrical 2.2 Kw AC motor with invertor giving variable speed PLC control. Electronic cam box.
24v control circuit.
3 Kw single phase for hot melt applicator.
The product is timed in sequence with the paddle transfer system utilising a gate mechanism and an additional accelerating conveyor.
The system transfers the product from the infeed conveyors into the product buckets.
Designed for 3 shift operation
Heavy welded steel frame with radiused top
Stainless steel shafts & guides
Completely guarded by easily removable fixed guards and hinged see-through, electronically interlocked top guards allowing operator clear view of machine-operation
To BS5303 standard
Overload protection on machine drive & mechanisms
Linear sliding product buckets to ensure close control of product at transfer into carton
Driven carton discharge belts
Hot melt glue jet applicator
Extensive use of heavy duty timing belts with duplex main drive chain
Low level noise below 80DB (A)
HMI touch screen control
A. 108: 355mm
B. 44: 250mm
C. 20: 100mm
Code dating
Deboss coding
Ink coding
Stainless steel guards
Automatic carton magazine feeder
Special electrical requirements
