GET A QUOTE
→The NSX3 series machine automatically erects cartons by means of a rotary motion vacuum pick off from a magazine on demand by the operator, and places them into continuously moving flighted chains.
The flaps are then formed on the non-load side and folded open on the load side for the operator to insert the product.
After loading, glue is applied to the bottom major flaps on both sides, These are then closed and sealed automatically. The cartons are discharged from the cartoner by powered side belts.
Max height variation 75mm
Output :-
Variable up to 100 Cartons/min
Carton closure:-
Electrical:-
3N~50 Hz 400/230V 1.5 kW AC motor giving variable speed 24v control circuit 3kW single phase for hot melt applicator
Carton Flight Pitch:-
Std options 7.5 / 10 / 15 pitch between flights
Designed for a three shift operation
Heavy welded steel frame
Stainless steel shafts and guides
Completely guarded by easily removable fixed guards and hinged see-through electrically interlocked top guards allowing a clear view of the machine operation.
Complies with BS5304
Robust transmission chains with high quality carton lugs.
Overload protection on machine drive and all mechanisms.
Integral product conveyor
Hot melt jet applicator
Extensive use of heavy duty timing belts with duplex main drive chain.
All adjusting points fitted with hand wheels, digital readouts, quick release handles and calibrated scales.
Mimic board fitted to electrical console with indicator lights showing machine stoppage points.
Low level noise ““ below 80db (A)
Emboss coding
Ink Coding
Stainless steel guards
Automatic carton magazine loader
3 or 4 arm rotary head
Cold gluing
Tuck in
Barcode scanning
Laser coding
Through conveyor
Open flap detection/rejection
90 degree horizontal turn wheel
A – 108: 355mm
B – 44: 250mm
C – 20 :100mm
